It is a familiar situation: Time is in short supply and yet the dentist, dental technician and patient all want dentures which satisfy the highest requirements. CediTEC and V-Print dentbase are now being offered by VOCO as a system which unites denture bases, prosthetic teeth and luting materials. This means the entire prosthesis can be produced quickly and simply in just a few steps.
While CediTEC / DT provides the material for the prosthetic teeth as well as the luting material, the denture base is being launched on the market as dentbase, part of the V-Print range. The combination of milling and 3D printing technology not only simplifies the process but also offers the technician performing the work the option of reproducing the prosthesis at any time – and far quicker than with the classic method.
CediTEC DT: CAD/CAM composite for prosthetic teeth
From individual prosthetic teeth to tooth sections right up to complete dental arches for removable dentures: CediTEC DT allows the quick and very precise production of customised prosthetic teeth using the CAD/CAM milling technique. The four shades A1, A2, A3 and BL, the additional option of customising the shade and the translucent colouring ensure appealing aesthetics. The innovative material can be polished effortlessly – delivering a natural sheen. The already cured composite is offered as a disc with a diameter of 98 mm and a height of 20 mm and fits all universal disc holders of milling devices conventionally available on the market.
CediTEC: System for luting prosthetic teeth in denture bases
The prosthetic teeth luting system comprises CediTEC Adhesive and CediTEC Primer. CediTEC Adhesive is mixed in the practical cartridge without mixing errors or air bubbles. Thanks to the convenient mixing tip, the product can be applied to the base directly from the cartridge using a dispenser. This means only as much material is mixed as is actually required. The enclosed CediTEC Primer creates the bond between the base/tooth and the adhesive. It is poured onto a mixing tray directly from the dropper bottle and applied to the base and tooth with a brush. After an air-drying period of only 30 seconds, CediTEC Adhesive can be applied and the teeth inserted. When used as a system together with V-Print dentbase it is therefore possible to produce high-quality dentures quickly and efficiently. However, CediTEC is of course also compatible with other systems currently available on the market.